Home/ Products/ Transmission/ Fast Gear 16JSD220TA Truck Transmission Assembly 16-Speed
In Stock Fast Gear 16JSD220TA Truck Transmission Assembly 16-Speed 1 / 4
Transmission

Fast Gear 16JSD220TA Truck Transmission Assembly 16-Speed

16JSD220TA

Fast Gear (Shaanxi) 16JSD220TA transmission assembly, 16 forward speeds with 2 reverse, full synchronizer overdrive, max input torque 2200 Nm and 380 kW. Aluminum housing, 355 kg, 17 L oil. Complete new unit, nameplate and serial number verified. Genuine and OEM quality available. Bulk orders welcome.

✓ OEM number matched confirm the part number before ordering ✓ Photographed the photos are the actual part we ship ✓ MOQ 1 piece · neutral packing ✓ Shipping worldwide from Jinan, 7–15 days

Fast Gear 16JSD220TA transmission assembly – a 16-speed manual gearbox from the Shaanxi Fast Gear 16JSD series, built for heavy trucks, tractor units, truck cranes and special-purpose vehicles. It is a full-synchronizer box with an overdrive top gear: 16 forward speeds and 2 reverse gears, taking up to 2200 Nm of input torque and 380 kW of input power at a maximum input speed of 2600 rpm. The aluminum housing keeps the complete unit at 355 kg, and the 17 L oil capacity covers the service fill. Each unit ships as a complete assembly with shift linkage, sensors and fittings installed, and the nameplate carries the transmission model and production serial number for traceability.

Specifications

Transmission Model 16JSD220TA
Brand Fast Gear (Shaanxi Fast Gear Co.)
Type Manual, full synchronizer, overdrive
Forward Speeds 16
Reverse Gears 2
Max Input Torque 2200 Nm
Max Input Power 380 kW
Max Input Speed 2600 rpm
1st / 16th Gear Ratio 14.03 / 0.83 (overdrive)
Reverse Ratios 13.42 / 11.13
Housing / Weight Aluminum / 355 kg
Oil Capacity 17 L
Condition New, complete assembly with nameplate and serial number
Fits Heavy trucks, tractor units, truck cranes and special-purpose vehicles – confirm by transmission model on the old nameplate or the order documents before purchase

Key Features

  • 16 forward speeds with a 0.83 overdrive top gear – keeps engine speed low at highway pace, which saves fuel on long hauls
  • Full synchronizer design on all forward gears, so shifts stay smooth even for less experienced drivers on site or in traffic
  • Double intermediate shaft architecture shares the load across two paths, which is how the box takes 2200 Nm without growing bulky
  • Aluminum housing at 355 kg keeps weight off the chassis compared with cast-iron boxes of the same torque class
  • Shipped as a complete assembly – shift linkage, fittings and sensors pre-installed, so swap-over is a bolt-in job rather than a rebuild
  • Nameplate with model 16JSD220TA and production serial number on every unit, so what you order is what you receive

Signs of Wear – When to Replace the Whole Assembly

Individual gears and bearings can be serviced separately, but a worn box usually announces itself early. Watch for grinding that stays through a full synchronizer adjustment, a whine that changes with road speed in several gears at once, metal flakes on the magnetic drain plug, or oil losing level with no visible seal leak. When two or more of these show up together on a high-mileage unit, replacing the complete assembly with this 16JSD220TA is usually faster and cheaper than a full teardown, and it resets the whole driveline instead of one corner of it.

Ordering & Related Parts

Confirm fitment by the transmission model stamped on your old nameplate, or send us a photo of it and we will verify before quoting. See also our Weichai WP7 engine wiring harness, Donaldson P628326 primary air filter and HOWO ESC module WG9160580517/1 for trucks running this driveline class.

Genuine and OEM quality available. Bulk orders welcome.

Frequently Asked Questions

Which trucks or machines use 16JSD220TA?

Fast Gear (Shaanxi) 16JSD220TA transmission assembly, 16 forward speeds with 2 reverse, full synchronizer overdrive, max input torque 2200 Nm and 380 kW. Aluminum housing, 355 kg, 17 L oil. Complete new unit, nameplat... Fits Fast (Faster) manual transmissions. If you are unsure about the application, send the old part number or a nameplate photo and we will cross-check it for you.

What quality options are available for 16JSD220TA?

We stock several quality grades for this part - original, OEM and a tested aftermarket version. Send us your target price and we will propose the closest option.

How fast can you ship 16JSD220TA?

Most orders for this part ship within 2-3 working days from stock. If it needs sourcing we tell you the exact date in the quotation - typically 5-10 working days.

What shipping methods do you use for 16JSD220TA?

We ship by air express for urgent needs and by sea or rail for volume orders. Packing photos and the tracking number are sent as soon as the goods leave our warehouse.

Need parts for your fleet?

Send your parts list or a nameplate photo — we reply with availability and price within 12 hours.

Request a Quote