SANY Track Roller 13034360 (Casting 216D) for SY Series Excavators

This is the second material code we carry in SANY’s 216 roller family: the factory label on the body reads **MCode 13034360**, and the casting on the roller itself is marked **SANY 216D** — both are visible in the photo, so you can compare them with the part on your machine before ordering.

If your SANY parts book lists 13034360 for the undercarriage of your excavator, this is the roller. If it lists **11358479 / SWZ216A** instead, that is the other listing in this family — the two are the same size class but carry different material codes, and we keep them on separate pages so the number you order matches the number on your old part.

**Specifications**

– Part number: 13034360
– Casting mark on body: SANY 216D
– Product: track roller (bottom roller) for crawler excavators
– Seal: floating (face) seal, grease lubricated
– Mounting: bolts to the track frame on the original bolt pattern — compare with the photos
– Finish: black painted, SANY casting
– Condition: new, genuine SANY supply with factory label and QR

**Before you order**

1. Read the MCode on the label of your old roller — 13034360 must match.
2. Look at the casting on the body: 216D as in the photo.
3. Tell us the machine model, or send the VIN and a photo of the roller in place, and we confirm against the SANY list. Undercarriage parts changed between series, and a roller that looks right can still be the wrong flange width.

**Typical failure signs**

A leaking flange seal (wet black ring, oil on the frame), flat spots or steps on the running surface, rumbling and vibration when travelling, a roller that has stopped turning and is being dragged by the chain, and track sag that comes back a shift after tensioning. Once the seal has leaked long enough for the bearing to run dry, the roller is scrap — there is nothing to rebuild.

**Fitting notes**

Release track tension and support the frame before removing the roller. Clean the mounting face, check the bolt holes, torque to the figure in the SANY manual for your model, and re-tension the track afterwards. Fit rollers in pairs on the same side.

**Related parts**

Top roller, idler, sprocket, track links and shoes. Send the machine model and we quote the whole set so the wear rates match.

**Ordering**

Minimum order 1 piece. Stock leaves within 2–3 working days; photos of the actual part and packing are sent before shipment, then the tracking number. Air express for urgent orders, sea or rail for bulk.

Who Is This Part For?